Chevy 350 build
Thread Starter
CF Beginner
Joined: Apr 2020
Posts: 2
Likes: 0
Chevy 350 build
Hello good people👍My name is Alf, and im driving a 86’ chevy caprice 2 door.
Im building a engine, to swap the old 305cid.
I have a 350 block, from 79’, and a couple of heads with castingnumber 333882. They was found on both 350 and 400 engines from 70’ to 80’. 1,94 intake and 1,5 exhaust. Will these heads give me some more power? In the setup i have a Holley 600cfm vacuum secundary, on a Edelbrock torker 2725 intake.
My next question is what you guy’s will recommend when it comes to a effective camshaft in this build? I’ll hope to get a engine who will produce somewhere around 290-300 hp.
Thanx in advance👍👍
Im building a engine, to swap the old 305cid.
I have a 350 block, from 79’, and a couple of heads with castingnumber 333882. They was found on both 350 and 400 engines from 70’ to 80’. 1,94 intake and 1,5 exhaust. Will these heads give me some more power? In the setup i have a Holley 600cfm vacuum secundary, on a Edelbrock torker 2725 intake.
My next question is what you guy’s will recommend when it comes to a effective camshaft in this build? I’ll hope to get a engine who will produce somewhere around 290-300 hp.
Thanx in advance👍👍
Last edited by Alf Olav Oddli; Apr 15, 2020 at 2:39 PM.
CF Monarch
Joined: Oct 2017
Posts: 4,605
Likes: 268
From: USA
Hello good people👍My name is Alf, and im driving a 86’ chevy caprice 2 door.
Im building a engine, to swap the old 305cid.
I have a 350 block, from 79’, and a couple of heads with castingnumber 333882. They was found on both 350 and 400 engines from 70’ to 80’. 1,94 intake and 1,5 exhaust. Will these heads give me some more power? In the setup i have a Holley 600cfm vacuum secundary, on a Edelbrock torker 2725 intake.
My next question is what you guy’s will recommend when it comes to a effective camshaft in this build? I’ll hope to get a engine who will produce somewhere around 290-300 hp.Thanx in advance👍👍
Im building a engine, to swap the old 305cid.
I have a 350 block, from 79’, and a couple of heads with castingnumber 333882. They was found on both 350 and 400 engines from 70’ to 80’. 1,94 intake and 1,5 exhaust. Will these heads give me some more power? In the setup i have a Holley 600cfm vacuum secundary, on a Edelbrock torker 2725 intake.
My next question is what you guy’s will recommend when it comes to a effective camshaft in this build? I’ll hope to get a engine who will produce somewhere around 290-300 hp.Thanx in advance👍👍
Thread
Thread Starter
Forum
Replies
Last Post
Derek_572
OLD - Private 'Wanted' Classifieds
5
Feb 2, 2008 2:12 PM
brobaey
OLD - PRIVATE For Sale / Trade Classifieds
2
Aug 3, 2007 7:40 PM
jweast
OLD - PRIVATE For Sale / Trade Classifieds
0
Apr 9, 2007 12:54 AM