Bob Lasko

- Grower Severe Duty roller Lifters SBC Part #66292. Has only 40 run on lifters. 400.00
2- MGP Aluminum Rods length 5.70, 2.00 rod ends with 0.927 pin.
Wrist pin holes have been bushed . Have only 30 runs. 475.00
3- BME Aluminum Rods, 265 Forging. Length 6.00. 2-inch rod end.0.927 pin. Used 40 runs. 250.00
4- BG 400 Fuel Pump. With return. This pump is new and was only used for 3 runs when my pump did not work. 300.00
5- K-Motion valve springs K-1500 will hold 350 psi at 2.00 installed height. 75.00
6- SBC Morose die cast Aluminum Valve covers, with AN Bungs installed 75.00
7- Peterson Vacuum Regulator 75.00
8- ACD Three Speed shifter control Digital. 150.00
9- Stroud racing jacket and pants, 3.2A/5. pants XL, Jacket 2XL set 200.00
10- Biondo Final Round Practrice tree,Regulator lights 75.00
11- Reamc Spring tester 0-500 pounds. This is like new. 600.00
12- Manley Titanium Valve Spring retainers for triple springs 1.625
diameter 75.00
13- Manley pushrods 3/8 diameter. .080 wall length 7.675 set of 16
50.00
14- Manley pushrods 3/8 diameter .080 wall length 7.794 set of 16, 50.00
15- Comp Cams push rods 3/8 diameter .080 wall length 7.600 set of 16, 50.00
16- SBC Ferrea Head Gaskets, NEW for 4.125 bore x .045 thick part #G50000 75.00
17-Hoosier Bias Drag slicks Two 13.5x31.5x15 Only have 18 runs 225.00

All Shipping for parts, to be paid by buyer

Any Questions, offers, please Call Bob Lasko nights, 203-834-0952. days 203-858-1952 or E-mail lasko@optonline.net

Bob Lasko

Practrice tree AND PUSH ROD SOLD,
MAKE OFFERS ON OTHER PARTS