I am trying to collect all of the single belt "steel" pulleys that were available for SBC power steering pumps mounted on the Drivers side under the alternator for a stock fitment for my 68 C10 with a short water pump. Saginaw style locking nut/pinch nut keyed shaft is what I have too work with. I have found two of them (3993325DJ, 3925537DC) and am looking for others, I have heard if I am right there's a third but if more was available then correct me on that. Stock fitment for my 68 C10 SBC.

** Here is what I am after for single grove steel stamped power steering it's stamped # 3825537 not sure on the end letters. I have been told that there is three different pulley alignment placements or off sets for the belt, again if wrong please advise me on that.
** Here is what I am after for the double grove flat steel stamped crank pulley it's stamped # 3744043BA, that one is mated up with a raised single grove pulley #3755820BC. which I already have
***********The above pictures shows what I am after**************
Again what I WTB,pulley 1 is # 3825537 pow strg pulley single grove, made from stamped steel. 2nd pulley is # 3744043BA crank pulley double grove,made from stamped steel.

Thanks in advance for any help
Marvin

 

I'm starting to wondering if I'm even in the right place for a 50 year old trucks need list. Is my truck to old for this forum?

 

This might help you. Good Luck!

https://www.bing.com/search?q=1968+c...3ac352050e8cfa

 

Thanks but I was wanting to give this forum the chance first too buy from. Why have this forum if you just direct people somewhere else (Ebay) ect. ect., that's what I thought this forum is all about members helping members get rid of extra parts laying around collecting dust anyway. Yes your help was good but here is a good place to shop for old not needed parts. Tic Toc Tic Toc.
Thanks