drax

Im putting a 5.0 out of a caprice in my sonoma- the truck has 212,000 on all the original stuff, but my diff. is going. So i have a caprice full car salvaged and i was thinking of just swaping the enging and diff. to the truck. There is one problem and that is i need a manual trans and i dont know what would work and i think the rear diff out of the caprice would look to wide on the truck. I could use some help finding a shop that could make me a "good" custom drive shaft and info on a what diff if not the caprice might be good.

drax

Im going to rebuild the diff and keep my original trans now so that should eliminate most of my problems but i will still need a bell housing to make it bolt together. Any ideas where i could find one?

old dog

if it is a 4.3 v-6 i think it will bolt up check the converter nose that pilot's in the crank .