Front Drive Saft not disengaging
October 22nd, 2008, 11:05 PM
#1
CF Beginner
Thread Starter
Join Date: Oct 2008
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Front Drive Saft not disengaging
Hi,
My 4x4 is acting a little weird, if its in two wheel drive the transfer case is not engaged, but the front dif is.
if its in 4x4 low or hi its fine. but when shifted back to 2wd it wont disengage. i pulled the vacuum hose off of the air bag that pulls the cable from the front dif, and it release fine, and so does the cable. So the problem is the vacuum isn't stopping when the 2wd button is pressed.
Please any help would be great
Joel
My 4x4 is acting a little weird, if its in two wheel drive the transfer case is not engaged, but the front dif is.
if its in 4x4 low or hi its fine. but when shifted back to 2wd it wont disengage. i pulled the vacuum hose off of the air bag that pulls the cable from the front dif, and it release fine, and so does the cable. So the problem is the vacuum isn't stopping when the 2wd button is pressed.
Please any help would be great
Joel
Thread
Thread Starter
Forum
Replies
Last Post
shuttleman505
Express, Savana & G-Series Vans
3
December 5th, 2011 11:40 AM
Jaysonic
Silverado, Sierra & Fullsize Pick-ups
7
March 8th, 2010 9:07 PM
ridingsouth
Silverado, Sierra & Fullsize Pick-ups
1
February 8th, 2010 9:40 PM