Replaced fuel pump and filter, still won’t start!

Reply Subscribe

Thread Tools

Search this Thread

Jun 7, 2018 | 10:09 PM

Tyler Houck

Thread Starter

CF Beginner

Joined: Jun 2018

Posts: 2

Likes: 0

Replaced fuel pump and filter, still won’t start!

I have a 2001 S10 with a 2.2 flex fuel. Recently my truck stalled out on me and wouldn’t start. It turns over just fine. I tested the relay it’s fine. I replaced the fuel pump and the filter and it still won’t start. I’m lost and very frustrated at this point. Please help!

Jun 7, 2018 | 11:06 PM

kevinkpk

CF Monarch

Joined: Jul 2011

Posts: 5,920

Likes: 140

From: kevinkpk

What gasoline are you using? I know it shows flex fuel, I am not understanding that with a 2001 s-10 unless it is european.

Jun 7, 2018 | 11:10 PM

Tyler Houck

Thread Starter

CF Beginner

Joined: Jun 2018

Posts: 2

Likes: 0

Regular gas, that’s just the type of filter it took.

Jun 8, 2018 | 7:26 AM

oldchevy

CF Monarch

Joined: Apr 2012

Posts: 6,216

Likes: 438

From: Miami, FL.

Are you getting spark? You may have an ignition/electrical issue? Spray some fuel into the throttle body, if it runs for a few seconds then it is a gas problem.

Jun 27, 2018 | 7:23 AM

toocute350

CF Beginner

Joined: Nov 2012

Posts: 23

Likes: 0

From: Southeast La

Quote:

Originally Posted by Tyler Houck

What about your oil pressure?How much oil pressure do you have at idle?What`s your oil pressure while driving?The reason for asking this is because both oil pressure sending unit/fuel pump work tandomly together.If you have a faulty oil pressure sending unit..Your engine will turn over but won`t start.One more question. Is your Check engine/service engine soon light on?If so check for codes.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Replaced fuel pump and filter, still won?t start!

Replaced fuel pump and filter, still won’t start!