How do I replace the power steering pump
May 1st, 2024, 6:00 PM
#1
CF Beginner
Thread Starter
Join Date: May 2024
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
How do I replace the power steering pump
1986 G30 Camper
Hey all,
I bought a G30 camper that had the power steering pump and brake master cylinder cut out. Hoses/lines etc.
How can I retrofit a new P/S pump to fit the hydroboost, and get it near where the location original was so belts fit?
I don't know where it was located, or if its even possible. Any help is appreciated.
-USAFmechanic
Van Specs
Area I think the P/S pump is located.
Hydroboost
Not sure what lines these are to...
Hey all,
I bought a G30 camper that had the power steering pump and brake master cylinder cut out. Hoses/lines etc.
How can I retrofit a new P/S pump to fit the hydroboost, and get it near where the location original was so belts fit?
I don't know where it was located, or if its even possible. Any help is appreciated.
-USAFmechanic
Van Specs
Area I think the P/S pump is located.
Hydroboost
Not sure what lines these are to...
Last edited by mountainmanjoe; May 1st, 2024 at 6:03 PM.
Thread
Thread Starter
Forum
Replies
Last Post