1990 Silverado Brake Rotor Specs
#1
CF Junior Member
Thread Starter
1990 Silverado Brake Rotor Specs
I'm going to need new rotors soon and am confused by the specs I'm finding. There are apparently two rotor sizes:
1.) 11.61" diameter with a 1.04" thickness, and a height of 4.19"
2.) 11.63" diameter with a 1.29" thickness, and a height of 4.55"
I'm particularly confused by the "height" spec.
I would rather not disassemble everything to measure what I currently have installed when there may be a logical answer based on the VIN number, or something. Also, it could be the previous owner installed the incorrect size at some point and I'd like not to repeat his mistake.
Any thoughts?
Thanks!
Haner
1.) 11.61" diameter with a 1.04" thickness, and a height of 4.19"
2.) 11.63" diameter with a 1.29" thickness, and a height of 4.55"
I'm particularly confused by the "height" spec.
I would rather not disassemble everything to measure what I currently have installed when there may be a logical answer based on the VIN number, or something. Also, it could be the previous owner installed the incorrect size at some point and I'd like not to repeat his mistake.
Any thoughts?
Thanks!
Haner
#2
Senior Site Administrator
probably depends on VIN number, could be different for a tow package, etc. i know with my 05 its a pain to get brake parts, my truck has some Frankensteined parts from the factory, some HD some 1500..i would verify with the dealership what part number you need first
Thread
Thread Starter
Forum
Replies
Last Post
Ilikehoe's
Tahoe & Suburban DIY and Useful Threads
8
October 20th, 2021 6:55 AM
DeHartShadow
Impala
1
September 9th, 2009 9:17 AM