Headers ?
#12
CF Junior Member
Thread Starter
Join Date: Aug 2012
Location: Virginia Beach, VA
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Just went to a shop and they, suggested shorty headers with the stock converters so it would be less job to do. Please help me. I want the longtubes but do i need to purchase another converter or can i use stock?
#13
CF Active Member
Try these....
OBX headers complete with high flow cats and will bolt up to any aftermarket Cat-Back muffler system including stock.
OBX has been around a long time and is a best kept secret.Lifetime warranty as well.
Don't let the price fool you,the quality is high.Don't use the supplied gaskets though,they suck.Use OEM MLS exhaust manifold gaskets available at any dealer for around $20.00.
This is a true bolt on system,no need for a shop to do it if you have a little mechanical skill.
You will still need a tune,yet this system allows the rear 02 sensors to be retained.
OBX Header 07 08 1500 Envoy Yukon Sierra 4 8 5 3L 6 0L | eBay
OBX headers complete with high flow cats and will bolt up to any aftermarket Cat-Back muffler system including stock.
OBX has been around a long time and is a best kept secret.Lifetime warranty as well.
Don't let the price fool you,the quality is high.Don't use the supplied gaskets though,they suck.Use OEM MLS exhaust manifold gaskets available at any dealer for around $20.00.
This is a true bolt on system,no need for a shop to do it if you have a little mechanical skill.
You will still need a tune,yet this system allows the rear 02 sensors to be retained.
OBX Header 07 08 1500 Envoy Yukon Sierra 4 8 5 3L 6 0L | eBay
Last edited by 67Motorcat; November 17th, 2012 at 7:06 AM. Reason: added link
#14
Super Moderator
Obx are great quality. But those aren't cats. Those are high flow resonators. Still would have to get a tune to get the rear o2 sensors tuned out. And don't do shorties, they're worthless on newer chevys (00+). If you have visual cat inspection then get an exhaust shop to custom fab a y-pipe with them in there. Not hard, did it to my dads
#15
CF Active Member
Yep your rite about that
It seems only the 07' to 08' comes with the resonators that "look" like Cats.
That's odd ?
I know the 99' to 06' wont work due to EGR provisions.
I wonder if the 09' and up with Cats would work on a 07',08' with a little welding?
It seems only the 07' to 08' comes with the resonators that "look" like Cats.
That's odd ?
I know the 99' to 06' wont work due to EGR provisions.
I wonder if the 09' and up with Cats would work on a 07',08' with a little welding?
#16
Super Moderator
EGR? You don't need that! lol. Had to get rid of my whole EGR system then tune it out when I did longtubes. And I don't see what's different between a 07-08 set and a 09+ set. Most companies sell 07+ headers and dot split em up. I guess the y-pipe is different
#17
CF Junior Member
Thread Starter
Join Date: Aug 2012
Location: Virginia Beach, VA
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Ok I have decided to go with the LPP headers. However I want to buy the high flow cats. I'm looking at magnaflow, I'm currently looking at Amazon.com for the cats. Thank you for the help. Any more suggestions, I'm very thankful because I really want it done good
Thread
Thread Starter
Forum
Replies
Last Post
daman02
Silverado & Fullsize Pick-ups
1
December 7th, 2005 9:26 PM