remote start removal. BIG PROBLEM PLEASE HELP!!
July 2nd, 2011, 1:58 PM
#1
CF Beginner
Thread Starter
Join Date: Jun 2011
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
remote start removal. BIG PROBLEM PLEASE HELP!!
1998 gmc 1500 5.0 l vortec. removed shady alarm and remote start system. Truck ran perfectly fine before but now it will start fine but shuts down immediately. I removed it because the previous owner intalled it and there were bare wires, batt rapidly losing charge. Batt now holding charge very well but the system has locked down. I really need to do something ASAP please!
Last edited by mrcleanmom; July 2nd, 2011 at 2:00 PM. Reason: spelling errors
July 8th, 2011, 10:52 PM
#2
CF Beginner
Thread Starter
Join Date: Jun 2011
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
problem was, whoever installed the auto start alarm must have souldered in a resistor to the little yellow wire, cut out the little fella, connect the 2 yellows, shrink tape and vrrrrrooom!
Thread
Thread Starter
Forum
Replies
Last Post
98Silverado621
General Tech
9
July 16th, 2021 9:13 AM
Hatchfinder
Tahoe & Suburban
3
December 16th, 2006 6:16 PM
