I've recently had my maf sensor replaced and throttle body cleaned. The guy cleaned it wrong by opening the butterfly manually. I replaced throttle body. Now my idle will jump to around 3K when I start truck. Sometimes on first start, especially if cold, it will idle normal. The rpms will fluctuate from 3K to 2.5K and if I can manage to get it to go into gear the rpm will come down to normal idle. Upon driving when I get 3rd gear I believe the rpm will jump back to 3K and it like it goes out of gear, there is no response from transmission. I have a decent scan tool, 5410 innova. So I have some values for different sensors if needed. I also start4d getting a code p0796 for pressure control solenoid 3 stuck off. As well as a p0102 MAF sensor circuit low frequency. Any ideas will help