first 350 sbc rebuild HELP needed!!!
#1
CF Beginner
Thread Starter
Join Date: Oct 2012
Location: nevada
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
first 350 sbc rebuild HELP needed!!!
so this rebuild has me about shizzin my pants because its my first and it seems complicated here are my application specs... btw THIS IS MY FIRST POST!
-93 chevy z71 silverado halfton
-6" lift, 35 tires
parts purchased for TORQUE AND TOW REBUILD:
-edelbrock intake (only 1 fits)
- gm performance crank
-.30 over new eagle pistons
- dart 72 cc heads with 23degree angled exhaust ports
-mallory ignition 6al box with coil
-brand new waterpump, oil, pan gaskets and all bolts
-stock 3.73 gears
-lunati idle to 5500 cam and lifters
PLEASE PROVIDE YOUR INPUT ON MY 1st REBUILD!!!
Anything i need to be attentive to before i get block bored to .30 over, polishing heads or polishing rotating assembly, chipping etc. all of your input will HELP GREATLY! Tyvm, 25 infantry div. veteran 99-03
-93 chevy z71 silverado halfton
-6" lift, 35 tires
parts purchased for TORQUE AND TOW REBUILD:
-edelbrock intake (only 1 fits)
- gm performance crank
-.30 over new eagle pistons
- dart 72 cc heads with 23degree angled exhaust ports
-mallory ignition 6al box with coil
-brand new waterpump, oil, pan gaskets and all bolts
-stock 3.73 gears
-lunati idle to 5500 cam and lifters
PLEASE PROVIDE YOUR INPUT ON MY 1st REBUILD!!!
Anything i need to be attentive to before i get block bored to .30 over, polishing heads or polishing rotating assembly, chipping etc. all of your input will HELP GREATLY! Tyvm, 25 infantry div. veteran 99-03
Thread
Thread Starter
Forum
Replies
Last Post
Jstevens_HVAC
Tahoe & Suburban
1
March 28th, 2013 10:20 PM