07 burbin LTZ w/auto headlamps.. Halo hookup?
February 19th, 2016, 8:59 AM
#1
CF Junior Member
Thread Starter
07 burbin LTZ w/auto headlamps.. Halo hookup?
I have a new Head lamp set-up in my 07 burbin LTZ and tapped into the DRL power line. They work but I would also like them to stay on when DRL goes off and the head light come on. What should of I have spliced into to have the Halo's running all the time?
I tried to get power from the turn signal which was odd because the center wire of the 3 on the turn signal shows constant steady power until I actually activate a turn then that wire shows no power???? Is it just me or is that not right?
Ron
https://www.dropbox.com/s/p8s84snl3n...ment.jpeg?dl=0
https://www.dropbox.com/s/69womexrhv...%202.jpeg?dl=0
I tried to get power from the turn signal which was odd because the center wire of the 3 on the turn signal shows constant steady power until I actually activate a turn then that wire shows no power???? Is it just me or is that not right?
Ron
https://www.dropbox.com/s/p8s84snl3n...ment.jpeg?dl=0
https://www.dropbox.com/s/69womexrhv...%202.jpeg?dl=0
