Thanks for the feedback.

Was the new crank sensor bad then?

 

no it wasnt the crank sensor as I have the old one in it now cause the new one I bought was bad. I had thought it was bad from the begining so it was the first thing I replaced.

I replaced the coil, icm and cap,rotor as well as the cam sensor.

I think tho it was the rotor that caused the coil or icm to take a dump.

The reason I say this the little plastic legs on the rotor were snapped off and allowing the rotor to wobble around in there.

The fuel issue was resolved with a new pump relay and a new fuel pickup. The ground was yanked out of the pickup entirely.