2007 Escalade > 2007 Tahoe Tail light swap
ORIGINAL: doo600
What the hell is a roof beacon...are you guys driving lighthouses? 
I assume it's the 3rd tailight?
ORIGINAL: ZX1100F1
The PK/BK wire is not part of the "Roof Beacon" system.
That system consists of three different color wires which are RD/WH, D-GN and BK.
The PK/BK wire is not part of the "Roof Beacon" system.
That system consists of three different color wires which are RD/WH, D-GN and BK.

I assume it's the 3rd tailight?
http://www.strobes-r-us.com/strobesrus_022.htm
Here is the link for replacement roof beacons. I have 4 of these in blue on my roof.
http://www.strobes-r-us.com/strobesrus022005.jpg
Here is the link for replacement roof beacons. I have 4 of these in blue on my roof.
http://www.strobes-r-us.com/strobesrus022005.jpg
ORIGINAL: konasmrz
The roof beaconconsists ofthe twin rows of lights that run the full length of the top of the vehicle so you can land helicopters on the roof at night. You mean to say that your Tahoe did not come from the factory so equipped?????
ORIGINAL: doo600
What the hell is a roof beacon...are you guys driving lighthouses? 
I assume it's the 3rd tailight?
ORIGINAL: ZX1100F1
The PK/BK wire is not part of the "Roof Beacon" system.
That system consists of three different color wires which are RD/WH, D-GN and BK.
The PK/BK wire is not part of the "Roof Beacon" system.
That system consists of three different color wires which are RD/WH, D-GN and BK.

I assume it's the 3rd tailight?
hi everyone,
im new to this whole forum deal. this isthe very first forum i've ever joined. i read the issue everyone is having with the escalade led tail swap on tahoes. i work for streetbeat customs and i too have a 2007 chevy tahoe. i bought the taillights thinking it was going to be a plug and play matter but no sir it wasn't.....!!! there is alot of hard wiring needed to be done on the taillights to work with the tahoe. i have not yet done it myself because of time matters but will do it next week or so.the fitting of the taillights is not perfect, the cadillac taillight sticks out a bit and is more boxy. the taillights that are a plug n play deal and fit perfect are the denali taillights but [:'(], in my opinion they do not look good!!! they have the black housing and a clear lense. i have a black tahoe and didnt like the way they looked......
im new to this whole forum deal. this isthe very first forum i've ever joined. i read the issue everyone is having with the escalade led tail swap on tahoes. i work for streetbeat customs and i too have a 2007 chevy tahoe. i bought the taillights thinking it was going to be a plug and play matter but no sir it wasn't.....!!! there is alot of hard wiring needed to be done on the taillights to work with the tahoe. i have not yet done it myself because of time matters but will do it next week or so.the fitting of the taillights is not perfect, the cadillac taillight sticks out a bit and is more boxy. the taillights that are a plug n play deal and fit perfect are the denali taillights but [:'(], in my opinion they do not look good!!! they have the black housing and a clear lense. i have a black tahoe and didnt like the way they looked......
ORIGINAL: PatrykKoul
So my turning signals are working, they are just flashing really fast. I thought they didn't work at all. Apparently I need resistors, but I don't know what ohm load???
So my turning signals are working, they are just flashing really fast. I thought they didn't work at all. Apparently I need resistors, but I don't know what ohm load???
Konasmrz....have you installed one of the tail lights to see about the fit. Can't remember who said in this subject that the Escalade tail lamp was not an exact fit???
I dunno who said they don't fit, the fit perfect. They bolt right up. The Escalade and the Denali are the same car as the exterior body is concerned, minus the front end, rear tail lights, rear 3rd brake light. I don't have mine on the car anymore due to the problems. I'm working day by day to fix, so once I solve all the problems completely, they'll be on the car.
BlkTahoe said in his post....
the fitting of the taillights is not perfect, the cadillac taillight sticks out a bit and is more boxy. the taillights that are a plug n play deal and fit perfect are the denali taillights
the fitting of the taillights is not perfect, the cadillac taillight sticks out a bit and is more boxy. the taillights that are a plug n play deal and fit perfect are the denali taillights
They stick out more, cause that's the Escalades look. My rear bumper and the escalade rear bumper are the same. The rear quarter pannel is the same, the hatch is the same, the vent caps look different cause the escalade ones have the grove, but they are the same size. So how could the lights not fit...? crazy. Yeah they don't plug and play, we already know this. I already have Denali lights, they come stock on my car... I don't care much for them.


