95 tahoe where's the heater control valve vacuum line go?
April 17th, 2017, 10:51 AM
#1
CF Beginner
Thread Starter
Join Date: Jan 2017
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
95 tahoe where's the heater control valve vacuum line go?
Hello all. Owner of a 95 tahoe (350 tbi) ls 2 dr. Been trying to figure why I'm getting no a/c and constant hot air from defroster . Well first issue is there is no heater control valve (been bypassed) and their is no blend door acuator by the drivers side floor board(by gas pedal). I bought both parts but cannot find a vacuum diagram for where the vacuum line for the heater control valve goes, and their are no screws for the blend door actuator . So this should be fun. Any help on the diagram would be great
April 20th, 2017, 6:01 PM
#4
CF Beginner
Thread Starter
Join Date: Jan 2017
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
I got the blend door acuator as well as the valve control installed , I'm going to redo the transistors in the control unit , apparently a common issue . My 92 had a different control unit . I'll come back with my findings
April 21st, 2017, 2:30 PM
#5
#aww... I used to have a 1995 Tahoe. I do miss that one. 2 door was very rare, and very truck-like. Not like the newer ones... Sold it w/220,000 on it. It was green. The spare was in the trunk.... for... reasons.