How to swap cooled front seats into 2013 Suburban 2500
April 13th, 2021, 7:25 AM
#1
CF Beginner
Thread Starter
Join Date: Apr 2021
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
How to swap cooled front seats into 2013 Suburban 2500
Since they are avail on the 1500' and the Yukon SLT 2500, could this be easily swapped to the Suburban 2500?
I figure the seat cushions, perforated seating surfaces, switches, wiring....but unsure of any ductwork or other equipment.
Any input appreciated.
I figure the seat cushions, perforated seating surfaces, switches, wiring....but unsure of any ductwork or other equipment.
Any input appreciated.
April 13th, 2021, 9:08 AM
#2
Cooled seats are not really cooled but have a 3 speed fan in them to ''ventilate'' them. It's all internal to the seat itself. Have them in my LTZ and HC Traverse.
BCM controls them so no easy plug and play swap. Will require so sort of external wiring and switches to power the fan as factory style would be intense harness work and reprogramming of the Body Control Module if that's even possible.
BCM controls them so no easy plug and play swap. Will require so sort of external wiring and switches to power the fan as factory style would be intense harness work and reprogramming of the Body Control Module if that's even possible.
Last edited by repairman54; April 13th, 2021 at 9:14 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Mrgoodwrench1985
General Tech
11
February 4th, 2017 12:31 AM