Invisicord hardwiring of V1 in an 09 Tahoe - WHERE?
April 21st, 2009, 10:00 AM
#1
CF Junior Member
Thread Starter
Join Date: Aug 2008
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Invisicord hardwiring of V1 in an 09 Tahoe - WHERE?
Hey all,
Just wondering if anyone has used the Invisicord to hardwire a V1 to the rear view mirror in an '09 Tahoe yet. Invisicord.com tell your where to plug in the 12v and ground on an '07, but not on an '09. I don't want to just assume that it's the same for each vehicle.
I've got OnStar and whatnot in the mirror, so the mirror plug is choc-full-o-wires. Definitely don't want to guess at this.
Anyone done it yet? Can you share exactly where each wire goes?
Thanks!
/< / /2 /<
Just wondering if anyone has used the Invisicord to hardwire a V1 to the rear view mirror in an '09 Tahoe yet. Invisicord.com tell your where to plug in the 12v and ground on an '07, but not on an '09. I don't want to just assume that it's the same for each vehicle.
I've got OnStar and whatnot in the mirror, so the mirror plug is choc-full-o-wires. Definitely don't want to guess at this.
Anyone done it yet? Can you share exactly where each wire goes?
Thanks!
/< / /2 /<
April 22nd, 2009, 7:48 AM
#3
invisi
i have that exact radar detector they show in the pics on that site.
the 'hardwiring' kit from worst buy was $34.99 i think.
i noticed it was just a RJ-11 phone jack... so I got 4' of phone wiring at radio snack for $3.00 or less; disassembled the factory 12v connector to find the right wiring pattern, and boom, i had a $3.00 solution....
the 'hardwiring' kit from worst buy was $34.99 i think.
i noticed it was just a RJ-11 phone jack... so I got 4' of phone wiring at radio snack for $3.00 or less; disassembled the factory 12v connector to find the right wiring pattern, and boom, i had a $3.00 solution....
