new compressor and shocks have been getting along very well, until thanksgiving. We had to fill the back of our burb with a heavy load going one way, it sat down and pumped up perfect and held it all the way down. When we unloaded it didn't release as much air as I was expecting. And since that trip the rear has been high and the pump once in a while kicks in to keep it up. It sits higher than suburbans without auto ride, the back is much higher than it should be and a big difference between the front ad rear...

Any way to reset the ride computer or are the sensors in need of replacement?

Thanks,
Joe

 

Tried pulling the fuse of the system or to the BCM?