Service 4wd Help
December 12th, 2010, 12:40 PM
#1
CF Beginner
Thread Starter
Join Date: Dec 2010
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Service 4wd Help
I have a 99 Suburban that I just had and engine installed. Its the 5.7. Before any work was done the 4wd worked fine. Now the engine is installed, My fuse #2 was blown. I replaced it and the service 4wd light stays on and no lights work on the 4wd switch. if i pull the #2 fuse and put it back in, the lights on the switch all come on then go off and theservice 4wd light comes on. I checked for any grounds left of.. couldn't see any. Any help would be great...thanks in advance...Nice Forum.
Thread
Thread Starter
Forum
Replies
Last Post
abj182
Silverado, Sierra & Fullsize Pick-ups
2
August 5th, 2015 8:58 AM
D Chevy
Tahoe & Suburban DIY and Useful Threads
0
September 17th, 2012 12:06 PM
Stingertrey
Silverado, Sierra & Fullsize Pick-ups
1
May 31st, 2011 9:49 AM
DianaT
General Tech
4
November 29th, 2007 12:12 AM
