Sound set up help
#21
CF Active Member
Join Date: Aug 2006
Location: Chesterton, IN
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
RE: Sound set up help
Use Clarion or Rockford Fosgate components and speakers, you will be blown away with Clarity. www.gosmm.com
#22
RE: Sound set up help
IfI were to replace all the speakers in my Tahoe using the stock radio (i have the Bose system no Nav) but not the Bose amp, would I need any additional equipment side from Pac line level converter? Also, has anyone found a good set of replacement speakers for the rear pilars. Thanks in advance.
#24
Guest
Posts: n/a
RE: Sound set up help
ORIGINAL: ZX1100F1
1" front Delco Tweeters: a-pillars.
6.5" Bose mid wofers: front doors.
6.5" Delco full range wizzer-cone: rear doors.
3" Bose mid's: rear D-pillars.
6.5" Bose DVC Sub inclosure: front center console.
1" front Delco Tweeters: a-pillars.
6.5" Bose mid wofers: front doors.
6.5" Delco full range wizzer-cone: rear doors.
3" Bose mid's: rear D-pillars.
6.5" Bose DVC Sub inclosure: front center console.
#26
RE: Sound set up help
#27
CF Junior Member
Thread Starter
Join Date: Feb 2007
Location: New York
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
RE: Sound set up help
Well I just ordered all the damn gearfor the damn audio setup, i am just going to let my local circuit city do the intsall , because honestly i dont trust my local audion shops but one and they charge $$$$ of money...
I am still up in the air with the hi low convertor and hope that circuit city has the parts needed to do the install. I am still in the air with the pac adapters.
I need two of them so i am told, but which one. I dont want to order themto find out they are not the ones i need.
replacing the cabin speakers with 4 6.5" and 4 1" tweets and adding 2 12" subs
4 6.5" speakers powered by seperate amp and also the 2 12" subs. will not be using the factory bose amp and keeping my factory headunit due to rear video package.
help which adapter and modelnumber or link to one
I am still up in the air with the hi low convertor and hope that circuit city has the parts needed to do the install. I am still in the air with the pac adapters.
I need two of them so i am told, but which one. I dont want to order themto find out they are not the ones i need.
replacing the cabin speakers with 4 6.5" and 4 1" tweets and adding 2 12" subs
4 6.5" speakers powered by seperate amp and also the 2 12" subs. will not be using the factory bose amp and keeping my factory headunit due to rear video package.
help which adapter and modelnumber or link to one
#28
#30
RE: Sound set up help
Ijust installed all new speakers (focal 165v2 components in the front and eclipse point 6.5 point sources in the rear) in my truck with a six channel zapco amp. What a pain it was.I wanted to keep the onstarbut once u add a head unit and an amp u need to rewire the vehicle. So now i have the oem 3 inch speakers in the rear pillars as my onstar speakers, which worked out extremely well.. The other option to keep onstar was add a seperate speaker under the dash, but idecided against that.