(turbo) vacuum solenoid replaced, New problem: hard shifting gears
May 1st, 2013, 6:46 AM
#1
CF Beginner
Thread Starter
Join Date: Apr 2013
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
(turbo) vacuum solenoid replaced, New problem: hard shifting gears
I have my 1996 suburban 6.5TD for more than 2 years now. I found out that my vacuum solenoid was broken. So I drove without turbo support for 2 years. I got it delivered (I'm living in Europa so it takes some time) and replaced it.
What a big difference, the turbo is working perfectly and the suburban is much more powerful.
But now I have a new problem. After the replacement, the automatic transition is shifting very hard.
Can it be caused by changing the solenoid of the turbo? Or is it a coincidence?
It does use al gears but it shifts hard in all gears. Hot or cold.
Can someone give me a starting point where to look first? (I think I have 4l80e transmission?)<!-- google_ad_section_end -->
What a big difference, the turbo is working perfectly and the suburban is much more powerful.
But now I have a new problem. After the replacement, the automatic transition is shifting very hard.
Can it be caused by changing the solenoid of the turbo? Or is it a coincidence?
It does use al gears but it shifts hard in all gears. Hot or cold.
Can someone give me a starting point where to look first? (I think I have 4l80e transmission?)<!-- google_ad_section_end -->
Thread
Thread Starter
Forum
Replies
Last Post
agapemusic
Express, Savana & G-Series Vans
3
February 17th, 2014 9:41 AM
rtarb41323
Malibu
0
September 19th, 2012 3:48 PM
FairTax
Express, Savana & G-Series Vans
0
February 18th, 2007 5:01 AM
