08 hybrid was supposed to have LEDS.

https://chevroletforum.com/m_15746/tm.htm

 

How come in thumbnail number 3, if you look at the wires from the resistors when it's zomed in, it looks like they have been photo-shopped, cut and pasted, and then the wire was drawn with a brush, and in parts you can see a white outline around the black wire when it overlaps the other black wire...???

 

...because it was photoshopped in. I took pictures as I wasdeveloping the modand had already completed thebundling & wrapbefore I realized I did not have a pic showing the second resistor (in an unwrapped state) & was not going to tear apart the final version just for a pic showing the 2nd resistor; so through the miracle of technology I fixed the pic to get you guys what you needed!

Ps. My Esky applique's should be done tomorrow (paint), so I'll post updated pics when I get them on hopefully this weekend.....

 

I have been following the discussion regarding the tail light swap. I can not find where you posted the instructions. Could you please tell me where to find your instructions? Thanks

 

???? the beginning of this post.

...1st entry has everything incl. circuit diagram, what's needed, where to get, pics "along the way" etc.

 

Sorry, I could not get the first page to load.......I did find it thank you

 

I have read through the instructions and I just want to say you did a great job of explaining the process. This should make it much easier for those of us who want the look, but who are not techies.

 

Here are a couple of pics showing finished project WITH Escalade Applique's installed....... Finally Done!

[IMG]local://upfiles/4713/0DF4AAFFFE74436BBBBE7E72C3989838.jpg[/IMG]

[IMG]local://upfiles/4713/7E0200BA1A7047D685BB845BADB83407.jpg[/IMG]

 

Pretty flippin' SWEEEET!

Come down to Cali and hook mine up!
I'll give ya a 6-pack and 50 bucks!

 

I definately like the finished look with the Esky Applique installed. Great Job!!!