Hello!
So earlier this year, I had all of the power window motors in my 2003 Tracker replaced. The rear ones were, on the driver side, very slow, and on the passenger side, dead. However, now they are still slow, with the passenger side one still occasionally stopping and needing to be pushed and lifted/lowered. I'm thinking it may be wiring, but before I tear it apart, I wanted to hear from others what their ideas may be.

Thanks.

 

Did you replace just the motors or the entire assembly? Sometimes the assembly bogs down and needs some lubrication to loosen it up.

 

The entire assembly. Motor, guide, etc.