brake controller wiring help needed
Thread Starter
CF Beginner
Joined: Aug 2011
Posts: 4
Likes: 0
brake controller wiring help needed
hi all i have a 2013 traverse. i am connecting up a trailer brake control
i have the pigtail that came with the suv connected to the harness under the dash but the 5 wires are not marked as to what their function is
the wire colors are as follows
black
blue
red with black stripe
white
gray.
i found a wiring diagram and have it wired but no power to the controler. does anyone know what size fuse the controller will need? also are there wires under the fuse box somewhere that need to be connected to the fuse block like on the 2006 avalanches?
norm
i have the pigtail that came with the suv connected to the harness under the dash but the 5 wires are not marked as to what their function is
the wire colors are as follows
black
blue
red with black stripe
white
gray.
i found a wiring diagram and have it wired but no power to the controler. does anyone know what size fuse the controller will need? also are there wires under the fuse box somewhere that need to be connected to the fuse block like on the 2006 avalanches?
norm
Last edited by mungo; Jan 15, 2014 at 7:37 PM. Reason: found wiring diagram but have another question
Thread
Thread Starter
Forum
Replies
Last Post
taz3
Silverado, Sierra & Fullsize Pick-ups
2
Feb 20, 2010 7:09 PM
capflyer
Silverado, Sierra & Fullsize Pick-ups
1
Feb 3, 2009 11:15 AM
