The Brakes... again a problem.
Thread Starter
CF Beginner
Joined: Dec 2009
Posts: 5
Likes: 0
From: Vancouver BC Canada
The Brakes... again a problem.
The brake pedal in my 2001 Chevy Venture was hitting the floor when I tried to brake.
Changed the master cylinder, changed the calipers, changed the wheel cylinders. Got it bled at a GM Goodwrench garage because I know that you need to have an ABS scan tool purge the ABS module.
I got it back and it was still a little spongy. I thought it was cause my brakes were low, so I changed the front pads and rotors. The brakes are STILL spongy. With the ABS module bled and no sign of bubbles in the brake system, what else could it make my brakes still spongy?
Thanks ahead of time.
Changed the master cylinder, changed the calipers, changed the wheel cylinders. Got it bled at a GM Goodwrench garage because I know that you need to have an ABS scan tool purge the ABS module.
I got it back and it was still a little spongy. I thought it was cause my brakes were low, so I changed the front pads and rotors. The brakes are STILL spongy. With the ABS module bled and no sign of bubbles in the brake system, what else could it make my brakes still spongy?
Thanks ahead of time.
Last edited by halfasemitone; Dec 2, 2009 at 10:41 PM. Reason: forgot to put the year and model of the vehicle.
Thread
Thread Starter
Forum
Replies
Last Post
Mille Racer 69
Silverado, Sierra & Fullsize Pick-ups
3
Dec 8, 2010 8:26 PM
98Silverado621
Silverado, Sierra & Fullsize Pick-ups
3
Jul 11, 2009 9:02 PM
