Venture 1997-2005
This minivan from Chevy offers a sporty look as well as all of the modern additons of the minivan market.
Platform: U-Body

Chevy venture P1639 code

Thread Tools
 
Search this Thread
 
Old Feb 12, 2009 | 2:36 PM
  #1  
alyvenegas's Avatar
Thread Starter
CF Beginner
 
Joined: Feb 2009
Posts: 2
Likes: 0
Default Chevy venture P1639 code

hi, i have a chevy venture van and its reading a code that we cannot figure out what it is it says "P1639" all tha computer says is:

Definition: PCM 5 volt reference voltage circuit condition.
explanation: The ECM has detected a fault in the 5 volt reference voltage line.
Probable Cause: 1.- Sensor using 5 volt reference line shorted to ground
2.- circuit short to ground.

Can somebody help me figure what it is so we can fix it please...... thank you

Last edited by alyvenegas; Feb 24, 2009 at 10:54 AM.
Reply
Old Feb 12, 2009 | 9:23 PM
  #2  
shawnvw's Avatar
Banned
 
Joined: Jan 2008
Posts: 2,541
Likes: 14
Default

check for a grounded wire somewhre between your engine sensors, and the PCM. Most of the sensors use a 3 wire setup: ground, 5v positive, and signal back to the computer.
Reply
Old Feb 24, 2009 | 10:53 AM
  #3  
alyvenegas's Avatar
Thread Starter
CF Beginner
 
Joined: Feb 2009
Posts: 2
Likes: 0
Default

hi whats PCM stand for,,,, sorry... hahaha but i dont know much about mechanic terms...... thanxs....
Reply
Old Jan 31, 2012 | 4:47 PM
  #4  
Captv2k's Avatar
CF Beginner
 
Joined: Jan 2012
Posts: 1
Likes: 0
Question P1639

Originally Posted by shawnvw
check for a grounded wire somewhre between your engine sensors, and the PCM. Most of the sensors use a 3 wire setup: ground, 5v positive, and signal back to the computer.
do you have a diagram to where these sinsors are located so I can trouble shoot this problem. I also have a code of P1639 now i have to disconnect my battery cause my head and rear lights would stay on with the key off. At one time one of the relay was over heating and blow up a few fuses where the a few things wherent working now the radio don't work before it stop working we smilled somthing burning can it be a wired burned inside the radio, the radio does turn on but the speakers won't work. You can hear a sound coming out of the speakers when you turn the ignition on and when you try to push on of the power window buttons wish in fact don't work. I had to take off the positive battery in order to shot off the lights. If the radio had a short woudn't the radio not turn on. I have a big project now and this the only car my wife has to get around. I pray it doesn't get cold so I can fix this problem any advice would be apprecaited. Thank You.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
drgjanocha
Venture
0
Jan 3, 2015 2:35 PM
mustangralle
Venture
0
Apr 7, 2008 7:35 PM
sheriff13
General Tech
0
Mar 25, 2008 12:55 PM
sheriff13
Venture
0
Mar 25, 2008 12:44 PM




All times are GMT -5. The time now is 5:08 AM.