My 2002 Venture's power locks do not function. I have checked the fuses and all are good in both boxes. I checked for voltage at the drivers door plug when unplugged from the power lock switch and found no power on any of the sockets coming from the wiring harness. I would naturally assume that there should be power there with or without the key on but I tried it in both key positions and still found no power. I do not have a diagram of this vehicles power lock wiring but I have one of another of the same year and it shows a power lock relay. Can anyone tell me where this relay is located in this van?


Please help!


Thanks, Andy

 

Hi!
Look at the site GregA .
Engine Starting System - Chevy Venture

 

Thanks for the info! very helpful.


BTW, where is the Body Control Module (BCM) located? Is there a site for component locations available?


Andy

 

Hi! on the question BCM can also see Greg. Upgrade Body Control Module (BCM) - Chevy Venture
In any case, I am very happy for you

 

Thanks for the BCM info. Does anyone have any experience with the BCM causing the power lock not to function? If not what else is a common cause of the power locks not functioning? I purchased this van for my 70 year old Mother-in-Law so having power locks would be a big plus.


Yeah! that post, now deleted was a post I thought I was posting on the Hyundai Tiburon forum site. Sorry for the confusion.


Andy

 

In 03-04 years, GM had problems with hairline cracks in the fuseblock on the left side of dash. Could be your problem