Chevrolet Forum - Chevy Enthusiasts Forums
Purchased this G3500 Cutaway in 2018.. This is how it looked when I got it with only 19,100 original miles.
Purchased this G3500 Cutaway in 2018.. This is how it looked when I got it with only 19,100 original miles.
0 2021/02/20 15:55:25
This is what I purchased for my G3500 Toy Hauler Project...
This is what I purchased for my G3500 Toy Hauler Project...
0 2021/02/21 08:13:10
This is when I got home after driving it from out west, where I purchased it, and I also hauled the power-plant for another project of mine with me, on the back.
This is when I got home after driving it from out west, where I purchased it, and I also hauled the power-plant for another project of mine with me, on the back.
0 2021/02/21 15:19:23
0 2021/02/21 15:24:12
The custom flatbed I had made for my G3500.
The custom flatbed I had made for my G3500.
0 2021/02/21 15:27:18
0 2021/02/21 15:29:14
0 2021/02/21 17:07:02
0 2021/02/21 17:09:34
0 2021/02/21 17:09:51
0 2021/02/21 17:10:08
0 2021/02/22 08:30:13
0 2021/02/22 08:32:51
0 2021/02/22 12:00:43
0 2021/02/22 12:01:17
In 2020, I brought this home on a Friday night in August.
In 2020, I brought this home on a Friday night in August.
0 2021/02/24 11:00:11
Inside passenger side, before I gutted everything.
Inside passenger side, before I gutted everything.
0 2021/02/24 11:04:01
Inside driver side, before I gutted everything.
Inside driver side, before I gutted everything.
0 2021/02/24 11:05:09
My personalized layout design.
My personalized layout design.
0 2021/02/24 11:37:51
My flip up bed design
My flip up bed design
0 2021/02/24 11:39:12
Need to Remove These Brackets
Need to Remove These Brackets
0 2021/02/26 05:45:57
0 2021/02/26 05:47:58
Rivet heads ground off on one side.
Rivet heads ground off on one side.
0 2021/02/26 05:48:31
Rivet heads ground off on both sides and ready to remove the two brackets.
Rivet heads ground off on both sides and ready to remove the two brackets.
0 2021/02/26 05:51:35
0 2021/02/26 05:58:10
Driveshaft loop removed and now sitting on top.
Driveshaft loop removed and now sitting on top.
0 2021/02/26 05:58:46
Cutting some 4x4 to length and securing them to the saw horses.
Cutting some 4x4 to length and securing them to the saw horses.
0 2021/02/26 06:03:16
Jacking up one side of the sleeper box, so I can get the sawhorse under the two 6X6.
Jacking up one side of the sleeper box, so I can get the sawhorse under the two 6X6.
0 2021/02/26 06:11:58
This side gave me a hard time. As I was lifting this side, the box wanted to lean forward and it kept me from getting the sawhorse under both 6x6 by myself. So, I had to come up with a solution to keep the one 6x6 up in the air that had the most load on in.
This side gave me a hard time. As I was lifting this side, the box wanted to lean forward and it kept me from getting the sawhorse under both 6x6 by myself. So, I had to come up with a solution to keep the one 6x6 up in the air that had the most load on in.
0 2021/02/26 06:14:16
Jump ahead and the box is up in the air. It is high enough that I can now pull the trailer out from under it.
Jump ahead and the box is up in the air. It is high enough that I can now pull the trailer out from under it.
0 2021/02/26 06:37:10
Yep, It will clear as I pull the trailer out.
Yep, It will clear as I pull the trailer out.
0 2021/02/26 06:39:20
Checking once more, the back side, just to be sure.
Checking once more, the back side, just to be sure.
0 2021/02/26 06:40:24
All is well. Trailer has been removed from under the sleeper box.
All is well. Trailer has been removed from under the sleeper box.
0 2021/02/26 06:52:09
My G3500 with its new custom made flatbed is now under the sleeper box. Ready to start the next stage of this build, which will begin tomorrow morning August 9, 2020.
My G3500 with its new custom made flatbed is now under the sleeper box. Ready to start the next stage of this build, which will begin tomorrow morning August 9, 2020.
0 2021/02/26 06:53:07
0 2021/03/01 08:08:25
0 2021/03/01 08:10:11
The Style Center Console I need, for my 2001 G3500, has an extra tray just in front of the dash.
The Style Center Console I need, for my 2001 G3500, has an extra tray just in front of the dash.
0 2021/03/01 08:10:52
Front view of the kind of Center Console I need with the long tray just in front of the dash.
Front view of the kind of Center Console I need with the long tray just in front of the dash.
0 2021/03/01 08:13:14
You can also see that it is longer or deep and sticks out more from the dash and into the passenger area.
You can also see that it is longer or deep and sticks out more from the dash and into the passenger area.
0 2021/03/01 08:15:25
I had to remove the fiberglass cab extension
I had to remove the fiberglass cab extension
0 2021/03/01 19:38:40
A couple hours later and the cab extension was removed.
A couple hours later and the cab extension was removed.
0 2021/03/01 19:39:24