Chevrolet Forum - Chevy Enthusiasts Forums
A BigHorn 7x16x7high upgraded trailer.
A BigHorn 7x16x7high upgraded trailer.
0 2019/05/29 18:52:18
0 2018/12/21 15:01:45
0 2018/12/21 15:00:42
0 2018/12/21 14:59:31
0 2018/12/21 14:57:38
0 2018/12/20 14:18:14
0 2018/12/20 14:18:14
0 2018/12/20 14:18:13
0 2018/12/20 14:18:13
Shiny new unit, had to be careful the gasket was smooth and seated correctly so as not to be damaged.
Shiny new unit, had to be careful the gasket was smooth and seated correctly so as not to be damaged.
0 2018/12/20 14:02:03
The old unit looked fine.
The old unit looked fine.
0 2018/12/20 14:02:03
The wiring plug and harness looked fine and were well secured. The unit itself is held on by press clips going around the perimeter.
The wiring plug and harness looked fine and were well secured. The unit itself is held on by press clips going around the perimeter.
0 2018/12/20 14:02:03
I found that it helped to remove the hose/cable management bracket for access to the back of the tps.
I found that it helped to remove the hose/cable management bracket for access to the back of the tps.
0 2018/12/20 14:02:03
0 2018/07/10 14:10:52
0 2018/07/10 14:09:17
Reassembled and installed it looks pretty good. Difficult to make out but the camera is mounted just to the side of the key lock.
Reassembled and installed it looks pretty good. Difficult to make out but the camera is mounted just to the side of the key lock.
0 2018/07/10 13:56:37
This shot was after the initial modification, a great improvement. Some file work shaped the camera frame even more. Finally, the bracket was once again flush and even all the way across.
This shot was after the initial modification, a great improvement. Some file work shaped the camera frame even more. Finally, the bracket was once again flush and even all the way across.
0 2018/07/10 13:56:25
The mounting bracket was easily modified leaving plenty of material to support the camera.
The mounting bracket was easily modified leaving plenty of material to support the camera.
0 2018/07/10 13:54:50
Once removed it can be seen how the camera mounting mechanism was designed.
Once removed it can be seen how the camera mounting mechanism was designed.
0 2018/07/10 13:53:02
0 2018/07/10 13:50:55
Another angle of the issue
Another angle of the issue
0 2018/07/10 13:50:34
The backing bracket can no longer be installed.
The backing bracket can no longer be installed.
0 2018/07/10 13:49:54
The frame which holds the camera in place blocks this bracket stud.
The frame which holds the camera in place blocks this bracket stud.
0 2018/07/10 13:49:19
The stock frame assembly
The stock frame assembly
0 2018/07/10 13:48:36
0 2018/07/10 13:31:50
0 2018/07/10 13:31:36
0 2018/07/10 13:31:30
0 2018/07/10 13:30:10
0 2018/07/10 13:30:00
0 2018/07/10 13:29:43
0 2018/07/10 13:29:33
0 2018/07/10 13:29:21
0 2018/07/10 13:28:57