Chevrolet Forum - Chevy Enthusiasts Forums
0 2022/11/01 15:37:28
The front and rear clips loaded, but not tied down yet.
The front and rear clips loaded, but not tied down yet.
0 2022/08/01 20:14:21
Temporary wooden rails until I decide how I want them to look and get metal ones made.
Temporary wooden rails until I decide how I want them to look and get metal ones made.
0 2022/08/01 19:57:06
Drive side view of new cab to sleeper box seal
Drive side view of new cab to sleeper box seal
0 2022/08/01 19:53:41
Using the tractor and 2 large ratchet straps to pull the sleeper box towards the cab evenly and hold it in place while I tighten it down.
Using the tractor and 2 large ratchet straps to pull the sleeper box towards the cab evenly and hold it in place while I tighten it down.
0 2022/08/01 19:51:30
0 2022/08/01 19:49:13
I went to NJ to get it.
I went to NJ to get it.
0 2022/08/01 19:41:11
BTW - Here is my personal Toy Hauler. (The wooden rails are temporary - until my friend can make the ones I want - to fit the custom flatbed I had him make for this.)
BTW - Here is my personal Toy Hauler. (The wooden rails are temporary - until my friend can make the ones I want - to fit the custom flatbed I had him make for this.)
0 2022/07/28 16:02:58
0 2022/07/28 16:00:20
The newer, replacement sleeper box.
The newer, replacement sleeper box.
0 2021/04/05 22:13:49
The center console needed that extra length on top to fit the longer/deeper engine cover.
The center console needed that extra length on top to fit the longer/deeper engine cover.
0 2021/03/20 09:23:17
Finally found a center console. It's not the right color, but I'm happy to have one I can use.
Finally found a center console. It's not the right color, but I'm happy to have one I can use.
0 2021/03/20 09:21:51
After the 2020 modifications I did.
After the 2020 modifications I did.
0 2021/03/05 08:00:56
When I got it home after purchasing it.
When I got it home after purchasing it.
0 2021/03/05 07:57:18
When I got it home for the first time
When I got it home for the first time
0 2021/03/05 07:56:34
A little bit of snow. Grin
A little bit of snow. Grin
0 2021/03/02 19:42:48
This is how it will look, while I use it this summer. That is if they lift the travel restrictions. Grin
This is how it will look, while I use it this summer. That is if they lift the travel restrictions. Grin
0 2021/03/01 21:00:57
Kevin added in a nice thick piece of angle iron to keep the strength in the crossmember and still allow the box to sit lower.
Kevin added in a nice thick piece of angle iron to keep the strength in the crossmember and still allow the box to sit lower.
0 2021/03/01 20:39:12
I had Kevin remove the top back part of the cross member to allow the box to sit lower, without having to cut or damage the support on the sleeper box.
I had Kevin remove the top back part of the cross member to allow the box to sit lower, without having to cut or damage the support on the sleeper box.
0 2021/03/01 20:37:21
The new rear mounting bracket with a center rubber mount.
The new rear mounting bracket with a center rubber mount.
0 2021/03/01 20:36:14
Closer view of the rubber mount on top of the new bracket.
Closer view of the rubber mount on top of the new bracket.
0 2021/03/01 20:35:05
One of the front mounts for the sleeper box.
One of the front mounts for the sleeper box.
0 2021/03/01 20:34:28
G3500 without the flatbed and my trailer sitting outside Kevin's, while he finished the flatbed.
G3500 without the flatbed and my trailer sitting outside Kevin's, while he finished the flatbed.
0 2021/03/01 20:29:12
This was my very temporary mounts for the sleeper box. Grin
This was my very temporary mounts for the sleeper box. Grin
0 2021/03/01 20:28:07
0 2021/03/01 20:26:07
Looking good from this view too.
Looking good from this view too.
0 2021/03/01 20:17:18
Liking how it is starting to look. But, I want the box to be a little lower.
Liking how it is starting to look. But, I want the box to be a little lower.
0 2021/03/01 20:12:38
Front view of the test fit.
Front view of the test fit.
0 2021/03/01 20:10:28
Coming down for a landing and almost there. Grin
Coming down for a landing and almost there. Grin
0 2021/03/01 20:08:05
Made a lifting and lower block. If anyone has done a custom build before; you know there are times when you have to test fit, remove and install again, and you do this a number of times, until you get it right and are happy with the results. Once you have it the way you want it; you have to blow it a part and either paint or powder coat stuff and then put it all back together again. Grin ​​​​​​​
Made a lifting and lower block. If anyone has done a custom build before; you know there are times when you have to test fit, remove and install again, and you do this a number of times, until you get it right and are happy with the results. Once you have it the way you want it; you have to blow it a part and either paint or powder coat stuff and then put it all back together again. Grin ​​​​​​​
0 2021/03/01 19:52:02
0 2021/03/01 19:44:38
Started raining and I had to cover the opening of the cab with a large piece of plastic and call it a day.
Started raining and I had to cover the opening of the cab with a large piece of plastic and call it a day.
0 2021/03/01 19:43:14
Backed up the truck and lined up the sleeper box. Now it is time to lower the box and test fit it.
Backed up the truck and lined up the sleeper box. Now it is time to lower the box and test fit it.
0 2021/03/01 19:40:36
A couple hours later and the cab extension was removed.
A couple hours later and the cab extension was removed.
0 2021/03/01 19:39:24
I had to remove the fiberglass cab extension
I had to remove the fiberglass cab extension
0 2021/03/01 19:38:40
You can also see that it is longer or deep and sticks out more from the dash and into the passenger area.
You can also see that it is longer or deep and sticks out more from the dash and into the passenger area.
0 2021/03/01 08:15:25
Front view of the kind of Center Console I need with the long tray just in front of the dash.
Front view of the kind of Center Console I need with the long tray just in front of the dash.
0 2021/03/01 08:13:14
The Style Center Console I need, for my 2001 G3500, has an extra tray just in front of the dash.
The Style Center Console I need, for my 2001 G3500, has an extra tray just in front of the dash.
0 2021/03/01 08:10:52
0 2021/03/01 08:10:11
0 2021/03/01 08:08:25