Lambert2828

1. I know the problem. Let me know if anyone is stuck in neutral. I'll explain the best way to help get transfer case out of neutral.

kingrump

• How do I get the transfer case out of neutral please help

Warder65

• What is the problem I'm having it just put new motor on and it won't shift

Bmorrow85

I have a 06 chevy suburban 1500 4x4, I replaced the transfer case encoder motor and the 4wd selector switch and just yesterday I replaced the Transfer case control module. It's still stuck in neutral and won't shift out at all. I barley have forward gears, no reverse and park is barley there. How do I fix this issue. I'm at a complete loss, any help would be great!

Penguin88

• I am currently having this issue with my 2005 GMC Sierra 5.0 SLE truck won't move I can hear the TC trying to shift out of neutral while the selected position light flashes but then goes out without shifting . I need this thing back on the road ASAP any help is much appreciated

alexisolivia

• Please help! I’ve tried everything. I’ve replaced every part. so I replaced the 4 wheel drive motor 2 Wheel Dr. modem , transfer case modem, transfer case modem push button. 4 wheel drive pushbutton four-wheel-drive under the dash modem, under the dash modem cleaned all the ground cleaned all the ground, checked all the fuses and checked all the fuses. I’m at a loss.

lucascam05

Did anyone fix this problem?? I can’t figure it out either and have all the same problems

lucascam05

My transfer case is stuck in neutral. The motor on the case was just replaced before I bought the truck. I replaced the switch, the control module, (I need to program that still) I cleaned the grounds, and replaced front actuator. Switch still says stuck in neutral and I’m getting service 4x4. I can hear the motor trying to do something while I press the buttons but no shifts happen. Any ideas? Maybe I need a different shift motor again? Faulty? Help