2007 - 2013 (GMT900) Section for all discussion related to the 2007-2013 Chevrolet and GMC trucks.

Clicking/Snapping

Old Jul 16, 2019 | 1:27 PM
  #1  
Jwnicholson's Avatar
Thread Starter
CF Beginner
 
Joined: Jun 2019
Posts: 3
Likes: 0
Default Clicking/Snapping

I recently just purchased an 08 Silverado 1500. I'm getting a snapping sound from what sounds like my drive shaft. It happens every time I put it in drive or reverse. I have even started to hear it going down the road when I let off and get back on the gas. It almost sounds like an electrical arc snap. Any advice would be greatly appreciated!
Reply
Old Jul 16, 2019 | 4:40 PM
  #2  
Doug D's Avatar
CF Active Member
 
Joined: Dec 2018
Posts: 163
Likes: 8
From: Virginia
Default

Check the universal joints though they usually clunk from my experience. After that maybe the pinion bearings? But the differential will have to be opened up to check those.
Reply
Old Jul 18, 2019 | 10:36 AM
  #3  
Jwnicholson's Avatar
Thread Starter
CF Beginner
 
Joined: Jun 2019
Posts: 3
Likes: 0
Default

Ok i will try universals and go from there. Thanks
Reply
Old Aug 12, 2019 | 7:49 AM
  #4  
Jwnicholson's Avatar
Thread Starter
CF Beginner
 
Joined: Jun 2019
Posts: 3
Likes: 0
Default

I swapped out universals and the snap was still there. I found another Thread that lead me in the direction of the drive shaft. I took the chance and bought a new drive shaft that came with the slip yolk. My snap is now gone!!!! I'm not sure if it was the drive shaft itself or the slip yolk but the for the price difference i just bought the both as a pair.
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 6:56 AM.