2007 - 2013 (GMT900) Section for all discussion related to the 2007-2013 Chevrolet and GMC trucks.

Low oil pressure issues

Old Feb 11, 2018 | 12:51 PM
  #1  
Gfundlbz387's Avatar
Thread Starter
CF Beginner
 
Joined: Feb 2018
Posts: 3
Likes: 0
From: Topeka ks
Default Low oil pressure issues

I have an 08 Silverado 5.3L. I’ve recently replaced my oil sending unit or oil pressure switch because of dash light indicator and message saying low oil pressure stop engine. I’ve replaced this same part about 8 months ago and that fixed the issue. This time, it has not. Is there any other possible problems that could be happening. Maybe an oil pump issue or o-ring issue on the oil sending tube inside the pan?
Reply
Old Feb 15, 2018 | 7:07 AM
  #2  
Suburban Dude's Avatar
CF Active Member
5 Year Member
 
Joined: Jan 2017
Posts: 174
Likes: 1
Default

Apparently there is a screen below the oilpressure switch (at the back of the block). I wonder if that was getting plugged. Certainly it can be the O ring issue as well which requires dropping the pan. Any way of getting an actual oilpressure reading on a seperate gage?
Reply
Old Feb 15, 2018 | 8:27 AM
  #3  
Gfundlbz387's Avatar
Thread Starter
CF Beginner
 
Joined: Feb 2018
Posts: 3
Likes: 0
From: Topeka ks
Default

I just changed the sending unit screen and that was the issue. It was plugged pretty bad. Thank you for your reply and input.
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 3:38 PM.