Dim Halos
Thread Starter
CF Beginner
Joined: Jan 2020
Posts: 3
Likes: 1
Dim Halos
Hello again,
So I got my SpyderŽ PRO-JH-CCOB05-LED-C - Chrome Halo Projector Headlights with Parking LEDs assemblies installed. I wired the Parking LEDs to the blinkers just for shiggles... and I wired the Halos to the parking lights (a brown wire if I remember correctly). In the garage everything looked great...but when I took it out for a spin, I pulled up to face a full-length window so I could see the front, and I could barely even tell the Halos were on they were so dim. What did I do wrong? Did I read or hear something about the parking lights being 6v vs 12v?? Is that why the Halos are dim? If that's the case, what do I wire the Halos into?
Any thoughts would be appreciated!!!
So I got my SpyderŽ PRO-JH-CCOB05-LED-C - Chrome Halo Projector Headlights with Parking LEDs assemblies installed. I wired the Parking LEDs to the blinkers just for shiggles... and I wired the Halos to the parking lights (a brown wire if I remember correctly). In the garage everything looked great...but when I took it out for a spin, I pulled up to face a full-length window so I could see the front, and I could barely even tell the Halos were on they were so dim. What did I do wrong? Did I read or hear something about the parking lights being 6v vs 12v?? Is that why the Halos are dim? If that's the case, what do I wire the Halos into?
Any thoughts would be appreciated!!!
CF Monarch
Joined: Oct 2017
Posts: 4,605
Likes: 268
From: USA
Hello again,
So I got my SpyderŽ PRO-JH-CCOB05-LED-C - Chrome Halo Projector Headlights with Parking LEDs assemblies installed. I wired the Parking LEDs to the blinkers just for shiggles... and I wired the Halos to the parking lights (a brown wire if I remember correctly). In the garage everything looked great...but when I took it out for a spin, I pulled up to face a full-length window so I could see the front, and I could barely even tell the Halos were on they were so dim. What did I do wrong? Did I read or hear something about the parking lights being 6v vs 12v?? Is that why the Halos are dim? If that's the case, what do I wire the Halos into?
Any thoughts would be appreciated!!!
So I got my SpyderŽ PRO-JH-CCOB05-LED-C - Chrome Halo Projector Headlights with Parking LEDs assemblies installed. I wired the Parking LEDs to the blinkers just for shiggles... and I wired the Halos to the parking lights (a brown wire if I remember correctly). In the garage everything looked great...but when I took it out for a spin, I pulled up to face a full-length window so I could see the front, and I could barely even tell the Halos were on they were so dim. What did I do wrong? Did I read or hear something about the parking lights being 6v vs 12v?? Is that why the Halos are dim? If that's the case, what do I wire the Halos into?
Any thoughts would be appreciated!!!
Thread
Thread Starter
Forum
Replies
Last Post
