Will my valves clear of the pistons?
Thread Starter
CF Beginner
Joined: Dec 2014
Posts: 1
Likes: 0
Will my valves clear of the pistons?
Hi.
I have a 1968 Chevrolet 327 5.4 liters 1. gen SB.
Recently I bought these cylinder heads:
http://www.summitracing.com/parts/tfs-30410013-m72
And these roller rocker arms:
http://www.summitracing.com/parts/tfs-31400510
I am now thinking about complementing these heads by rebuilding with a hydraulic roller camshaft as well, and I have been looking at this camshaft:
http://www.summitracing.com/parts/cca-sk12-415-8
I know that my pistons are stock, and im afraid that with the new setup, my pistons will go straight into the valves on my first engine rev.
Could someone advice me a bit on my setup here?
I have a 1968 Chevrolet 327 5.4 liters 1. gen SB.
Recently I bought these cylinder heads:
http://www.summitracing.com/parts/tfs-30410013-m72
And these roller rocker arms:
http://www.summitracing.com/parts/tfs-31400510
I am now thinking about complementing these heads by rebuilding with a hydraulic roller camshaft as well, and I have been looking at this camshaft:
http://www.summitracing.com/parts/cca-sk12-415-8
I know that my pistons are stock, and im afraid that with the new setup, my pistons will go straight into the valves on my first engine rev.
Could someone advice me a bit on my setup here?
Administrator
Joined: Apr 2008
Posts: 7,573
Likes: 48
From: Austin, Texas
Welcome to the forum...
You might also consider cross posting your question to our sister forum
Home - Corvetteforum
.
You might also consider cross posting your question to our sister forum
Home - Corvetteforum
.
Thread
Thread Starter
Forum
Replies
Last Post