Changed Throttle Body and Spark Plugs, Still want crank
#1
Changed Throttle Body and Spark Plugs, Still want crank
Driving up the road to the grocery store and my 2013 equinox lost power and stated a reduce in engine power with stability track.Got info to change throttle body because the sensor on the body itself may be bad, so I bought a brand new one. Strangely so, it would crank with the old one before I changed it, but after I put the new one on, it turns over like it’s going to crank, but just spins. My fuel systems seem to be working, because I an hear the pumps cutting on. I changed the spark plugs and although I see oil on plug 2, it still should be able to, at least crank. I did the reset protocol (the ignition and accelerator steps), but still want crank. Can’t be the solenoid switch, I’ve checked it. At first, I thought I might’ve flooded, but even after it sat up for a few days, it still turns, but want crank up. Any ideas, I’m stomped? The battery is brand new and I made sure all the wires were connected several times.
Last edited by Mario Jones; January 17th, 2020 at 5:56 AM.
Thread
Thread Starter
Forum
Replies
Last Post
77south
General Tech
4
May 28th, 2018 4:45 PM
Firefox64
Tahoe & Suburban
37
March 27th, 2016 5:11 PM
Georgiaboy04
Silverado, Sierra & Fullsize Pick-ups
9
August 10th, 2012 11:43 PM