Teammuir1

I am using METHOD 1

PID 221940 all the same values but I changed edited the C to F

Teammuir1

ARTIE1
you mentioned for me to change decimal on my gauges... I like that idea... but your instructions are very vague
as you said to hold long on the gauge and go to settings..
here is a pic of what I get when I hold long on the gauge....
there is NO settings menu maybe you left a step out ?
I dont know... I am using Torque Pro

Teammuir1

OK CRAP..
I went back and re read.. I gave you Trans temp PID...
I will work on the Oil pressure next..

Teammuir1

Oil pressure pid

pid # Long Name Short Name Min Value Max Value Scale Factor Unit Type Equation OBD Header

22115c Oil Pressure Oil Prss 0 200 x1 PSI (A*0.65)-17.5 AUTO

Teammuir1

OK thats some crap once again
I previewed my post and it looked just how I wanted it too I posted and it came up just like this garbled crap
WTH.. it wont stay the way I wrote it..

Teammuir1

Try this again.....
PID # ........LONG NAME......SHORT NAME .....MIN VALUE....MAX VALUE.....SCALE FACTOR.....UNIT TYPE.....EQUATION.....OBD HEADER

22115c}}}}}}}}}}}}}}}}}}}}oil pressure}}}}}}}}}}}}}}oil prss}}}}}}}}}}}}}}}}}}}}}}}}}}0{{{{{{{{{{{{{{{{{{{ {{{200}}}}}}}}}}}}}}}}}}}}}}}}}x1{{{{{{{{{{{{{{{{{ {{{{{{PSI}}}}}}}}}}}}}}}}}}}}} (A*0.65)-17.5 }}}}}}}}}}}} auto


MAIN thing about the pid number.. DONT FORGET to put the c in there.. I did and it didnt work.. 22115c

Teammuir1

STAN let me know if that works for you since I know your vehicle is a newer one... will be interesting to know.....

I am wanting outside temp...
Engine Oil Temp

I am researching ( looking on the net )

Twscarp

Long touch, Display configuration..., then Number of decimal places, enter 0, uncheck Use display default, touch OK.

Teammuir1

ARTIE 1
That worked perfectly.... Thanks.....
I found and installed
Fuel % used. which tells how much Fuel is left in the tank... Kinda neat ....

Twscarp

You mean thanks, Twscarp? Or did you figure it out without my explanation?