1972c/10 j-motor
August 3rd, 2015, 8:01 PM
#1
CF Beginner
Thread Starter
Join Date: Aug 2015
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
1972c/10 j-motor
I have a mid-90" vortex given to me that needs rebuilt .I'm would like to motor swap. Any good news or bad news I should be aware of? The truck had the two barrel for the 307. Any advice would be so grateful for a realdrandnew guy.
. Thanks. Ps are motors hard to rebuild?
August 7th, 2015, 8:36 PM
#2
CF Active Member
They are not really hard to rebuild but attention to detail cleanliness and a good technical manual are required. There are some special tools and equipment you will also need.
Thread
Thread Starter
Forum
Replies
Last Post
scoogie_scott
Tahoe & Suburban
11
May 27th, 2022 2:58 AM
Bulldogo
Cavalier
2
March 1st, 2015 8:15 PM
ththinnantboy
Engine Building & Overhauling
0
December 9th, 2013 6:10 PM