General Tech Good at troubleshooting? Have a non-specific issue? Discuss general tech topics here. IF YOUR QUESTION IS SPECIFIC TO A CERTAIN MODEL, IT DOES NOT GO IN THIS SECTION.
Sponsored by:
Sponsored by: CARiD

Hard shift

Thread Tools
 
Search this Thread
 
Old Nov 12, 2012 | 7:10 AM
  #1  
Scott Thompson's Avatar
Thread Starter
CF Beginner
 
Joined: Nov 2012
Posts: 25
Likes: 0
From: San antonio
Default Hard shift

Hi I have had a 2000 Chevy Cavalier 2.2 liter 4 cyl Automatic for about 5 or 6 years now. I have noticed the whole time I have owned it, that when I start the car and shift from Park to Drive I hear a clunk, and with the hood open the engine pivots back and forth one time really far and once engaged the engine doesn't shake at all. This only happens from park to drive, it does not do this from park to any other gears, and once the car is in drive everything is normal. The car has no shifting problems at all, no slips or clunking while driving or hitting the gas real fast on take off. I changed the all three mounts on the car yesterday. Upper engine mount (still in decent shape), lower dogbone (tore to hell), and Transmission mount (decent). I really haven't noticed it get any worse over the years I just know its not right. I have never changed the fluid or the filter since I owned the car, and most likely it has never been changed in the cars life. Could a dirty filter, and dirty fluid cause this problem? Or could the linkage need adjusted or replaced? Thanks in advance

Last edited by Scott Thompson; Nov 12, 2012 at 11:23 AM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mowglie
Tahoe & Suburban
0
Sep 23, 2014 4:20 AM
HeavyChevy883
S-10 & Blazer
0
Mar 15, 2008 9:29 AM
djfoo2003
Cavalier
1
Nov 8, 2007 5:03 PM
madfish
Tahoe & Suburban
5
Sep 7, 2007 9:19 AM
bassintom
Tahoe & Suburban
3
May 3, 2006 4:02 AM




All times are GMT -5. The time now is 8:56 PM.