Here is a hard one for you techs
March 12th, 2009, 1:21 AM
#11
CF Beginner
Thread Starter
Join Date: Feb 2009
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
March 12th, 2009, 1:27 AM
#12
CF Beginner
Thread Starter
Join Date: Feb 2009
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
I replaced the temp sensor http://shop.advanceautoparts.com/web...S_285424062___ kinda still spit around a little less but it stalled still didnt know if i should undo the neg on the batt to reset the computer wonder if that would help, its late now ill try that in the morning 
March 12th, 2009, 7:10 PM
#13
CF Veteran
I was wondering if it might be one of the ports on the EGR valve partially opening during closed loop and then working OK after it warmed-up? Seems that I've had a similar problem with an open EGR acting just like a vacuum leak and stalling the engine.
March 28th, 2009, 5:47 AM
#18
Super Moderator
Ride of the Month
May 2009
Ride of the Month
May 2009
Brandon,
Gary is right, I would check the voltage on the TPS you replaced.
I had a similar problem when I changed my intake and TB, I had a bad temp sensor and even though I set the TPS with a voltage meter I found that the meter did not equal the OBD 1 reading when checked with a scanner.
Gary is right, I would check the voltage on the TPS you replaced.
I had a similar problem when I changed my intake and TB, I had a bad temp sensor and even though I set the TPS with a voltage meter I found that the meter did not equal the OBD 1 reading when checked with a scanner.
