General Tech Good at troubleshooting? Have a non-specific issue? Discuss general tech topics here. IF YOUR QUESTION IS SPECIFIC TO A CERTAIN MODEL, IT DOES NOT GO IN THIS SECTION.
Sponsored by:
Sponsored by: CARiD

Traction control and stabilatrak

Thread Tools
 
Search this Thread
 
Old Jun 18, 2017 | 1:08 PM
  #1  
bscheetz's Avatar
Thread Starter
CF Beginner
 
Joined: Jun 2017
Posts: 3
Likes: 0
Default Traction control and stabilatrak

2012 Suburban 60k miles. Everything works on the vehicle. Engine runs fine. Service traction control and stabilatrak are on at startup. Connected with Modis and extracted DTC's. Found C0710 DTC was active. Found the TSB that deals with the steering wheel position sensor. Fixed the loose connection and cleared the DTC. Went through all controllers and checked for additional DTC's. Found no other DTC. Started the vehicle and have the same issue but NO active or stored DTC. Any ideas? Thanks
Reply




All times are GMT -5. The time now is 11:35 AM.