General Tech Good at troubleshooting? Have a non-specific issue? Discuss general tech topics here. IF YOUR QUESTION IS SPECIFIC TO A CERTAIN MODEL, IT DOES NOT GO IN THIS SECTION.
Sponsored by:
Sponsored by: CARiD

trouble putting a year to block for rebuild

Thread Tools
 
Search this Thread
 
Old Jan 25, 2016 | 4:16 PM
  #1  
85Elco's Avatar
Thread Starter
CF Beginner
 
Joined: Jan 2016
Posts: 1
Likes: 0
Question trouble putting a year to block for rebuild

NEED SOME HELP PLEASE. I have a 1985 Chevrolet El Camino that I swapped the original 305 and 200 tranny for a 350 on 350. I did the swap about 6 years ago but never got around to finishing it. I'm wanting to rebuild it to a minimum 500hp. I got the numbers off the front of the block and they started with CE. Everywhere I've looked CE is for engines that were replaced with a warranty. I was told the motor came out of a 79model 1 ton. Any way of putting a year to this block. The numbers on the back are 3070010. Thx in advance.

Chevrolet
1985 El Camino
Stock now with big dreams
Reply




All times are GMT -5. The time now is 2:58 PM.