K5 Blazer 1969-1994
While this model ended its run, it is not uncommon to see them on the road or off, years after production end.
Platform: Truck, GMT 400

81 C10 starting issues

Old Nov 7, 2018 | 9:49 AM
  #1  
Dkarns90's Avatar
Thread Starter
CF Beginner
 
Joined: Nov 2018
Posts: 3
Likes: 0
Default 81 C10 starting issues

Hey guys I am new here and new to the C10 world. I bought an 81 C10 about a month ago. It has a 350 sbc swapped into it. Motor and trans run great but I have a starting issues. On a fresh start the truck starts with no problem, even driving for an hour or so then parking and starting again there is no issue, but if I drive it around for a longer period of time and go to start it, it won’t even try to crank or anything, it has to cool down for two hours or so it seems and then it will fire right up. It also has a new battery. Any idea what would cause this?
Reply
Old Nov 7, 2018 | 7:06 PM
  #2  
oilcanhenry's Avatar
CF Monarch
 
Joined: Oct 2017
Posts: 4,605
Likes: 269
From: USA
Default

Originally Posted by Dkarns90
Hey guys I am new here and new to the C10 world. I bought an 81 C10 about a month ago. It has a 350 sbc swapped into it. Motor and trans run great but I have a starting issues. On a fresh start the truck starts with no problem, even driving for an hour or so then parking and starting again there is no issue, but if I drive it around for a longer period of time and go to start it, it won’t even try to crank or anything, it has to cool down for two hours or so it seems and then it will fire right up. It also has a new battery. Any idea what would cause this?
Likely a bad ICM. It gets too hot and has to cool down to operate again.
Reply
Old Nov 7, 2018 | 7:32 PM
  #3  
Dkarns90's Avatar
Thread Starter
CF Beginner
 
Joined: Nov 2018
Posts: 3
Likes: 0
Default

Originally Posted by oilcanhenry
Likely a bad ICM. It gets too hot and has to cool down to operate again.
I’m sorry but what do you mean by ICM?
Reply
Old Nov 8, 2018 | 4:20 AM
  #4  
oilcanhenry's Avatar
CF Monarch
 
Joined: Oct 2017
Posts: 4,605
Likes: 269
From: USA
Default

Originally Posted by Dkarns90


I’m sorry but what do you mean by ICM?
Ignition Control Module.
Reply
Old Nov 8, 2018 | 8:55 AM
  #5  
Dkarns90's Avatar
Thread Starter
CF Beginner
 
Joined: Nov 2018
Posts: 3
Likes: 0
Default

Originally Posted by oilcanhenry
Ignition Control Module.
Ok it’s only a $30 part and easy to change so I give it a shot. Thank you
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 3:29 PM.