I have a mud/crawler im building and here is some info on it, Its a s10 body sitting on a blazer frame and 1 ton running gears. I got the truck with a th350 and a stall but didnt like a auto in it. So I took a muncie sm465 4 speed with a np208c transfer case out of a silverado. He said that it was a 85 but not for sure. And I didnt get the flywheel out of the truck which was stupid of me. So I bought a flywheel off a local engine builder and it came from a truck because it has the k starting infront of the number. But I need a clutch kit for the tranny and dont know what to get to match the flywheel. I think its a 10in clutch but not for sure. Any help is much appreciated.

 

i've been looking for a truck clutch for my 76 as well, and i think there are only two sizes, eleven or twelve inch.. mines a 12 inch flywheel the measurement from bolt hole to bolt hole is actually about 11 and 3/4s, i'd measure your flywheel bolt holes that should give you a better idea of what your looking for