hey all, heres what I did..Front drivers side lowbeam out, so I changed it. When I was taking assembly out had lites on in 'auto' mode. didn't notice this. Dropped it as I took it out and light came on and popped/broke. So, I put the new one in with lights off. Now drivers side both dim in high and low and nothing comes on in 'auto'. Checked all fuses and ok. Did I damage a relay or what should I be looking for? Thanks for any help, Bob

 

well, must have been reading continuity through a switch or the 'auto' system. actually had to pull the fuses and look at them. being dim must have been feedback or something. just a blown fuse, Bob