Hey everyone I need help, I replced my lower intake gasket on my 99 Suburban. As I was adding water to the radiator I noticed water running out by the firewall. At first I was freaking out but I found out it was not the work I had done. The water was coming out one of the hoses going to the Heater Control Valve. Here's my problem when I grabbed the hose man all the hoses came off. it was dry rotted so bad the plastic just crumbled. Of course I want to put it back together right. you would think it would be obvious but to me it's not.
Can anyone help me by giving me a diagram the shows which hoses go where and which hoses connect to the tee,s that are installed into the Heater Contol Valve.
The main problem I am having is there is 2 different size hoses and ports.
With it just crumbling apart I was not able to see how they were all installed.
PLEASE HELP SOMEONE!!!!!
Thank you in advance

 

Welcome to the forum.

You will get more views if you post your question in the Tahoe section of the forum.

 

Thank you Shark for the advice, I will add my post to the Tahoe site