Chevy offering Camaro rolling chassis for drag racers
March 26th, 2013, 8:38 AM
#1
Chevy offering Camaro rolling chassis for drag racers
Filed under: Motorsports, Coupe, Chevrolet, Racing
There sure has been plenty of drag racing machinery to report about lately from the Chevrolet COPO Camaro to the Ford Mustang Cobra Jet, but General Motors has another quarter-mile racer up its sleeve with a new rolling chassis version of the Camaro. While the COPO is a turn-key racecar with a price tag pushing six figures, Chevrolet announced that it is also going to start offering a factory-built Camaro drag car similar to the COPO but stripped of most of the drivetrain components.
With a starting price of $55,000, the Camaro rolling chassis (click above to enlarge) will feature a complete body, race-ready interior including a rollcage, a solid rear axle (without the gearing), racing wheels and Hoosier drag tires, and it will be built at the same Detroit area facility where the COPO Camaro is assembled using mostly production parts. The owner will need to provide an engine (and wiring harness), transmission, driveshaft and rear differential gears (the "third member"), which is all available through the Chevrolet Racing parts catalog.
Chevy will build a limited number of the Camaro rolling chassis, but it isn't clear if production will be as limited as the COPO Camaro's 69-unit run. Scroll down for the official press release.Continue reading Chevy offering Camaro rolling chassis for drag racers
Chevy offering Camaro rolling chassis for drag racers originally appeared on Autoblog on Tue, 26 Mar 2013 09:29:00 EST. Please see our terms for use of feeds.
Permalink | Email this | Comments
More...
There sure has been plenty of drag racing machinery to report about lately from the Chevrolet COPO Camaro to the Ford Mustang Cobra Jet, but General Motors has another quarter-mile racer up its sleeve with a new rolling chassis version of the Camaro. While the COPO is a turn-key racecar with a price tag pushing six figures, Chevrolet announced that it is also going to start offering a factory-built Camaro drag car similar to the COPO but stripped of most of the drivetrain components.
With a starting price of $55,000, the Camaro rolling chassis (click above to enlarge) will feature a complete body, race-ready interior including a rollcage, a solid rear axle (without the gearing), racing wheels and Hoosier drag tires, and it will be built at the same Detroit area facility where the COPO Camaro is assembled using mostly production parts. The owner will need to provide an engine (and wiring harness), transmission, driveshaft and rear differential gears (the "third member"), which is all available through the Chevrolet Racing parts catalog.
Chevy will build a limited number of the Camaro rolling chassis, but it isn't clear if production will be as limited as the COPO Camaro's 69-unit run. Scroll down for the official press release.Continue reading Chevy offering Camaro rolling chassis for drag racers
Chevy offering Camaro rolling chassis for drag racers originally appeared on Autoblog on Tue, 26 Mar 2013 09:29:00 EST. Please see our terms for use of feeds.
Permalink | Email this | Comments
More...
Thread
Thread Starter
Forum
Replies
Last Post
shockguys
OLD - Member Group & Special Buys
0
April 7th, 2010 2:21 PM
Scott@Superchips
Silverado & Fullsize Pick-ups
1
March 15th, 2010 4:06 PM
63nova9sec
Nova & Chevy II
2
November 23rd, 2007 4:40 PM