307 heads needed
#1
307 heads needed
Hello,
I recently blew a head gasket and found that a couple valve had sunken into the head. I also found that a couple of the valves were very worn down where the valve meets the rocker. Im wondering if it would be cheaper to send out my stock heads for a rebuild, or to find a replacement set. Any advice would be appreciated.
Thanks
I recently blew a head gasket and found that a couple valve had sunken into the head. I also found that a couple of the valves were very worn down where the valve meets the rocker. Im wondering if it would be cheaper to send out my stock heads for a rebuild, or to find a replacement set. Any advice would be appreciated.
Thanks
#2
Hello,
I recently blew a head gasket and found that a couple valve had sunken into the head. I also found that a couple of the valves were very worn down where the valve meets the rocker. Im wondering if it would be cheaper to send out my stock heads for a rebuild, or to find a replacement set. Any advice would be appreciated.
Thanks
I recently blew a head gasket and found that a couple valve had sunken into the head. I also found that a couple of the valves were very worn down where the valve meets the rocker. Im wondering if it would be cheaper to send out my stock heads for a rebuild, or to find a replacement set. Any advice would be appreciated.
Thanks
I'd try eBay. They have all kinds of things on there. Here is a good list of heads:
https://www.ebay.com/sch/i.html?_fro...rs&_dcat=33617
Last edited by oilcanhenry; May 8th, 2022 at 2:21 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Fishinfooleric10@aol.com
Silverado, Sierra & Fullsize Pick-ups
2
November 13th, 2012 11:04 AM
mcvoss
Silverado, Sierra & Fullsize Pick-ups
1
August 8th, 2010 2:30 PM