2000 Blazer LS Fuel Pump
#1
2000 Blazer LS Fuel Pump
I have been having issues for the past few months with my blazer not wanting to start. I did everything from replacing all relays, fuses, & filter. I finally had to realize the pump went bad, well that's not the case. I had a hunch that the people who owned it prior to me may have replaced it already so I pulled the carpet from the cargo area and found an access panel to the pump. The pump looks like it is brand spanking new! There was a bundle of wires wrapped up in eletrical tape and I began to start just moving them around and when I hit my remote start the pump kicked on and the blazer started. My question is does anyone know the wiring for the new pumps and if there is some kind of diagram so I can rewire the pump correctly and not have it consistently short out on me. Thanks hope someone can give me a hand with this I spent 2 month trying to figure this out now I just need to get the wires taken care of.
Last edited by jolech550; July 16th, 2013 at 10:59 AM.
#2
Just put one in. The 2 purple wires are the sendung unit. The black is ground. The remaining wire is 12v to pump.. It's been a couple of months but to the best of my knowledge that was the setup on my 04 Blazer.
Thread
Thread Starter
Forum
Replies
Last Post
Keith Moon
Cavalier
1
November 6th, 2013 10:39 PM
hunter10220
Silverado & Fullsize Pick-ups
0
May 18th, 2011 8:37 PM